Textile Additives & Foils
Avient Taurus Modifers and Additives- Thickeners, thinner and matte additives
- Improved abrasion resistance and toughness of ink film
- Amazing affect additives to achieve textured suede of 3D effect
- International Coatings Catalyst Direct Print Nylon InkInternational Coatings Catalyst Direct Print Nylon Ink
- Amagic Textile Foil
- Simple way to add stand-out decoration and flare to t-shirts and other textiles
- Easy to apply
- Excellent wash resistance
- Apply with plastisol ink or transfer adhesive
- Crown Roll Leaf Metallized Hot Stamping Textile Foil For T-Shirts Or Fabric
- Developed for applications to t-shirts
- Applied using a clamshell heat press
- Fabric must be printed with appropriate adhesive
- Meadowbrook Polyester Jewels Glitter, 0.008 HexMeadowbrook Polyester Jewels Glitter, 0.008 Hex
- Meadowbrook Electric GlitterMeadowbrook’s Electric Glitter contain no aluminum making it an excellent option for designers who desire a sparkling effect in a water-based product.
- Avient K2982 Flexipuff Additive
- Produces elevated "puff: surface
- Additive for plastisol ink to create puff colors
- Excellent adhesion to fabrics, stretch properties and wash durability
- Suitable for use as an additive to reduce gloss
- STAHLS' Heat Transfer Foil
- Add a metallic finish for a unique effect on any garment
- Use with Stahls'® Adhesive
- Once adhesive is applied then press the foil
- Place foil over pressed adhesive at 300°F for 8-10 seconds, firm pressure
- Allow to cool completely before removing foil sheet
- Avient Viscosity Buster
- Designed to reduce viscosity in plastisol inks
- Do not use more than 3% by weight
- Avient Aquarius Zodiac Waterbase Additives
- Use additives listed below to tailor Aquarius™ inks to your individual requirements.
- Test all prints for print durability before starting the production run
- Aquarius Retarder Gel - Use 1-3% to increase open time
- Aquarius Retarder - Use 0.5-1% to increase open time
- Aquarius Thickener - Use 0.1-1% to increase viscosity
- Aquarius Fixer - Use 1-5% to improve fixation or reduce cure temperature
- MagnaPrint Corsslinker 500
- Considerably reduce the time of curing pigment prints
- Compatible with most MagnaPrint systems
- Particularly useful where dryers have insufficient dwell time
- Avient K2915 Curable Reducer
- Designed to reduce viscosity in plastisol inks
- Additions greater than 10% may reducer opacity, bleed and affect cure temperatures
